Aquafall wash action
Water is recirculated through perforated drum blades to create a cascade flow. You get a stronger wash action at a lower water level, so cycles are shorter and water use drops.
The RMS and RMG Series are Girbau's hard mount washer extractors, built for operators who want proven European engineering at a sharp price. Available from 10kg to 30kg, with RMG models extracting at a full 200G to cut drying time, and RMS models at 108G to 154G. Rugged, simple to run and virtually maintenance free.
Sizes in this range
Every capacity, one page
Pick the model that matches your load. Full specifications for each are further down this page, and our team will confirm the right size for your site.
Talk to a specialist
Pricing and advice on the Girbau RMG Series Washer Extractors
Tell us how your laundry runs and we'll come back with the right models, the running costs and a firm price. Every enquiry sent from this page is tagged to the Girbau RMG Series Washer Extractors so nothing gets lost in translation.
- Response within one business day, usually much sooner.
- Specification advice from people who install and service these machines.
- Finance, rental and staged upgrade options available.
- Nationwide service network and genuine parts held in Australia.
200G
Extract force on RMG models
10 to 30kg
Capacity range across the series
<70 dB
Noise level with G Drive inverter control
200°
Door opening angle for easy loading
Sustainable washing for professionals
Series 6 machines are designed around three things that matter in a working laundry: durability, low running cost and gentle linen handling. Every model is built in Europe with AISI 304L stainless drums and inverter drive as standard.
Aquamixer temperature control
Hot and cold water are blended to hit the programmed temperature precisely at the programmed level, saving energy and trimming time off every cycle.
Just in Load dosing
Water and chemical dosing are adjusted proportionally to the weight of the load, so a part load no longer costs the same in water, energy and chemicals as a full one.
G Drive inverter management
Girbau's own control link between inverter, motor and microprocessor balances the whole assembly, controls imbalance and keeps noise below 70 dB while reducing component fatigue.
Care Touch Drum
Drum perforations are stamped without sharp edges, so linen is treated gently, water clears faster during extract and fabric life is extended.
Twin Lock Autocheck safety
The machine only runs once both closed and locked door states are validated, and the dual status is rechecked on every cycle.
Hard mount
Hard mount technology and effective spinning
RMG models reach 200G extract, while RMS models run 108G to 154G depending on size. Hard mount machines bolt to a 200mm plinth on a firm floor, which keeps the cost of the machine down and the extract force high.
- RMG613, RMG617, RMG623 and RMG628 all extract at 200G
- Requires a concrete base and anchoring for quiet, vibration free operation
- Structural design calculated to avoid critical stress points
- Large drain clears bath water quickly and resists clogging
- AISI 304L stainless drum with viton seal, ozone process compatible
Daily use
Built around the operator
Drum diameter and depth are proportioned to make loading and unloading easier, with a wide opening and rounded outer casing to reduce knocks in a busy room.
- 200 degree door opening angle with an effortless lock
- Flat front cover that is easy to clean and resists dirt build up
- Four compartment dispenser box, two liquid and two powder
- External dispenser with 9 inlets and 4 independent electric signals
- Removable cover for quick access to inverter and drain
- Precoated panels, with stainless steel available as an option
Controls
OPL and vended control options
Choose the control that matches the site. On premise laundries run Logi Pro or Logi control, while vended and coin sites use Profit Plus or Coin control with pricing by program and time band.
- Logi Pro: 25 programs, up to 11 phases, 6 water levels, Just in Load and Rinse Hold
- Logi: 8 programs, up to 9 phases, delayed start and gradual cool down
- Profit Plus: 4 configurable vended programs plus 3 extra options, price per time band
- Coin control: 4 vended programs, token, coin or vending system payment
- External dosing connection with simultaneous dosing of two products
- Failure check, alarm messages and individual cycle counters
Services
Heating alternatives
RMS and RMG machines are available with electric heating, steam heating or no heating at all where you already have a hot water supply. We confirm the right configuration against the services available at your site.
- Electric heating from 4kW up to 19.5kW depending on model
- Steam heating for sites with an existing boiler
- Hot water feed only where hot water is already plumbed
- Two water inlets as standard
- Single phase options on smaller models, three phase from 25kg up
RMS and RMG Series specifications
Capacities shown at the 1:10 fill factor commonly used in Australia. Figures in the G force column show RMS first and RMG in brackets where both are offered.
| Model | Capacity (1:10) | Drum volume | G force | Width (mm) | Depth (mm) | Height (mm) |
|---|---|---|---|---|---|---|
| RMS610 | 10 kg | 99 dm3 | 108 | 685 | 760 | 1,080 |
| RMS613 / RMG613 | 13 kg | 126 dm3 | 125 (200) | 750 | 930 | 1,344 |
| RMS617 / RMG617 | 17 kg | 166 dm3 | 125 (200) | 750 | 1,063 | 1,344 |
| RMS623 / RMG623 | 23 kg | 226 dm3 | 141 (200) | 870 | 1,139 | 1,424 |
| RMS628 / RMG628 | 28 kg | 274 dm3 | 154 (200) | 870 | 1,174 | 1,466 |
Girbau reserves the right to change specifications without notice. Ask us to confirm dimensions, services and plinth requirements for your site before you order.
Where this range is installed
- Aged care and retirement living
- Hotels, motels and pubs
- Laundromats and vended sites
- Gyms, clubs and sporting facilities
- Restaurants and commercial kitchens
- Schools and student accommodation
Proven Girbau engineering at a sharp price
If your floor can take a hard mount machine, the RMG Series gives you 200G extract, low water and chemical use and a long service life without the premium of a soft mount installation. It is the workhorse choice for aged care, accommodation and vended sites across Australia.
Make an Enquiry- Long working life and virtually maintenance free build
- Lower water, energy and chemical cost per cycle
- Local Girbau parts holding and factory trained technicians
- Vended control options for coin and cashless sites
Frequently asked questions
What is the difference between RMS and RMG?
They share the same body and features. The difference is extract speed. RMG models spin at a full 200G across 13kg to 28kg, while RMS models run between 108G and 154G depending on capacity. Higher extract means less water left in the linen, so drying is faster and cheaper.
What capacities are available?
From 10kg up to 28kg at the 1:10 fill factor, or 11kg to 30.5kg at 1:9. Most aged care and accommodation sites land on the 13kg, 17kg or 23kg models, often paired with a matching Girbau ED Series dryer.
Do RMG washers need a concrete plinth?
Yes. These are hard mount machines, so they need to be anchored to a concrete base on a firm floor to run quietly and without vibration. If your site cannot take that, look at the soft mount GS Series instead, which is freestanding.
How does Just in Load save money?
The control adjusts water level and dosing time in proportion to the load weight. A quarter load uses around a third of the water and chemical a full load would, instead of the same amount every cycle. Over a year on a part loaded machine the saving is significant.
Can they be used in a laundromat?
Yes. With Profit Plus or Coin control you can set prices by program, extra option and time band, and take payment by token, coin or a cashless vending system. We can integrate cashless payment at the same time as installation.
What heating options are available?
Electric, steam, or no heating where you already supply hot water. We check the electrical supply, gas or steam availability and hot water capacity at your site and recommend the configuration that runs cheapest for you.
Are these machines suitable for aged care hygiene requirements?
Yes. The controls allow full programming of temperature, hold time and chemical injection, so you can run thermal disinfection cycles in line with AS/NZS 4146. The stainless drum is also compatible with ozone based processes.
What service and parts backing is there?
Aqualogic is a Girbau supplier with factory trained technicians and one of Australia's largest commercial laundry parts holdings. We install, commission, train your staff and cover the machines with preventative maintenance agreements Australia wide.