MILNOR MWF Suspended Open Pocket Washer Extractor Series

Milnor’s MWF-Series suspended washer-extractors range in capacity from 60-170 lb. (27-77 kg). Available in either E-P Plus® or MilTouch™ controls, Milnor’s MWF-Series offers you savings and programming flexibility– without compromising the wash quality you expect from a Milnor.

Milnor’s MWF-Series control options (E-P Plus® and MilTouch™) allow the operator advanced flexibility by manually creating or altering formulas, which are guided by the controls and promote accurate, proper washing. The display notifies the operator of key benchmarks (wash step, time remaining, etc.), which increases productivity and reduces downtime. Milnor’s tall rib construction and precise cylinder speeds provide excellent MAF (Mechanical Action Factor), which expedites the interchange of wash chemistry and water, for quicker washing and rinsing. The MWF-Series cleans the goods properly the first time, so your laundry and staff can continue to be efficient.

Milnor’s dynamically tuned suspension features a cutting-edge design that employs a unique, four-point suspension system. The centre of mass is located where an imbalance would occur. With Smooth Coil™ Suspension System, constructed of highly engineered fabric and rubber layered coils that provide low natural frequencies, vibration is constantly isolated (delivering smooth operation and performance). Dynamic forces are evenly applied resulting in: minimum vibration, smooth extraction, less wear and tear, and longer machine life. Tapered roller bearings have a large contact area – spreading force and contributing to long life. Front and rear bearings are fixed in the same housing, preventing damaging misalignment. Like all Milnor machinery, MWF-Series machines typically last longer because of their legendary ruggedness, thoughtful design, and dependable quality.

Milnor’s efficient MWF-Series is also eco-friendly. Milnor’s RinSave® water saver feature is standard on all MWF-Series washers (with either E-P Plus® or MilTouch™ controls). The patented software drives the basket toward a precise G-force that “slings” the wash liquor (including water, chemistry, and soil) out of the goods after a wash step. This feature will save up to 2 rinses per load and fill/rinse time. Laundries with the RinSave® feature will get more loads per hour to save you money! Simple hot and cold water inlets are used to quickly fill the washer without fill level overshoot. A third water inlet is used to thoroughly dilute chemicals so that raw chemicals do not directly contact and damage linens. Accurate water levels promote proper washing and prevent wasting water.

Milnor’s MWF-Series is highly efficient, reducing your utility costs. The frequency inverter drive allows the motor to reach maximum extraction speed more efficiently, thereby reducing peak electricity amperage draw compared to multi-speed motor machines. Bigger cylinder perforations provide (1) better wash quality by promoting excellent interchange of the goods with water and chemistry, (2) better rinsing by allowing rinse water to freely interact with the goods, and (3) better extraction by allowing water to escape from goods easily and quickly. The cylinder design minimizes wasteful rewashes and reduces drying time, all resulting in lower energy costs.

The second highest expense in a laundry is the cost of the linen (or to replace it). Milnor’s MWF-Series can help you extend your linen life with its safe chemical injection system. Chemicals are injected in the rear of the machine (unlike certain brands where chemicals are injected near the front of the machine at eye-level), then diluted and flushed into the sump. This prevents raw chemistry from coming into direct contact with the linen or the stainless steel. In addition to the chemical injection system, the MWF-Series’ spacious wash cylinders provide more room for lift and drop action and for goods to open up and absorb wash and rinse water – ensuring goods get clean the first time, reducing rewashes and linen fatigue.

  • Suspended frame allows for above-ground level installation
  • Tapered roller bearings are aligned in a rigid housing (ensures proper basket alignment)
  • Models have been tested for over 1,000 hours in an out-of-balance state
  • Superior wash cylinder design yields greater mechanical action (reduces rewashes for prolonged linen life)
  • Precise and easy-to-use controls
  • Four capacities to suit your laundry’s needs
  • Extended Warranty Plan
Product Details
Downloads
Manufacturer MILNOR
Product code MWF27, MWF45, MWF63, MWF77
Capacity 27kg, 45kg, 63kg, 77kg

Enquire Now